PRODUCTS

  • #


Original Vermeer HDD drill Rod


Product code Rod body OD
(inch)
(Wall Thickness) working length
(ft)
Thread type Tool joint OD
(inch)
Tool joint inside diameter of the pin end
(inch)
Pin connection length
(inch)
Grade HDD Drill rod torsional strength
(ft-lb)
HDD Drill rod tensile strength
(lb)
Tool Joint and body torsional strength ratio Minimum bend radius
(ft)
Angle Bend slope ratio
(%)
Part Number
D6x6( One piece upsetted ) 1.49 0.216 6 FS1 #200 1.890 0.748 1.990 Z140 900 3100 0.5 114 5.7 9.9 1019001
D7X11- D10X15 S3( One piece upsetted ) 1.66 0.256 6 FS1 #200 1.890 0.748 1.996 Z140 2342 3257 0.5 102 6.7 11.8 1001002
D10x14,D10x15( One piece upsetted ) 1.66 0.217 10 FS1 #200 1.890 0.748 1.996 Z140 2342 2830 0.55 102 11.2 19.8 1001005
D16X20A,D16X22 SERIES II,D20X22 S3( One piece upsetted ) 1.9 0.236 10 FS1 #250 2.126 0.748 2.500 Z140 3404 3556 0.55 117 9.8 17.3 1017002
D20x22,D20X22 SERIES II,D20X22 S3,D23X30 S3( One piece upsetted ) 2.06 0.256 10 FS1 #400 2.252 0.874 2.500 Z140 4016 4187 0.51 127 9 15.9 1016001
D23X30 S3,D24X40,D24X40A,D24X40 SERIES II,D24X40 S3( One piece upsetted ) 2.375 0.280 10 FS1 #600 2.638 0.875 2.500 Z140 7298 5298 0.63 146 7.9 13.8 1004023
D33x44,D36x50,D36x50 Series II( One piece upsetted ) 2.375 0.295 10 FS2 #602 2.756 1.181 2.874 Z140 6859 5557 0.57 146 7.9 13.8 1004015
D33x44,D36x50,D36x50 Series II( One piece upsetted ) 2.375 0.295 15 FS2 # 602 2.756 1.181 2.874 Z140 6859 5557 0.57 146 11.8 20.8 1004011
D33X44,D36X50,D36X50 SERIES II,D40X50 S3( One piece upsetted ) 2.375 0.315 10 FS1 #650 2.764 1.000 2.500 Z140 8427 5869 0.67 146 7.9 13.8 1004024
D33x44,D36x50,D36x50 Series II( One piece upsetted ) 2.375 0.315 15 FS1 #650 2.764 0.874 2.500 Z140 8847 5869 0.71 146 11.8 20.9 1004027
D36X50,D36X50 SERIES II,D40X55 S3( One piece upsetted ) 2.625 0.415 15 FS1 #700 3.110 1.102 3.000 Z140 11738 8496 0.6 165 10.4 18.4 1005006
D36X50,D36X50 SERIES II,D40X55 S3( One piece upsetted ) 2.625 0.415 10 FS1 #700 3.110 1.102 3.000 Z140 11738 8496 0.6 165 7 12.2 1005005
D50x100/Uni60x70( One piece upsetted ) 2.875 0.374 10 FS1 #900 3.250 1.181 3.500 Z140 12428 8464 0.57 177 6.5 11.4 1006006
D50X100,D50X100a,D60x90( One piece upsetted ) 2.875 0.386 15 FS1 #900 3.250 1.181 3.500 Z140 12428 8686 0.56 177 9.7 17.1 1005007
D50X100,D80x100 Series II, D60x90( One piece upsetted ) 3.5 0.374 15 FS1 #800 3.622 1.417 3.500 Z140 17362 10578 0.5 215 8 14 1009003
D100x120( One piece upsetted ) 3.5 0.394 20 FS2 #802 4.134 2.244 3.602 Z140 19590 11068 0.54 215 10.7 18.8 1009001
D100x120 Series II,D130X150,D60x90,D60x90 S3,
D100x140,D100x140 s3( One piece upsetted )
3.5 0.472 20 FS1 #1000 4.331 2.244 3.500 Z140 26076 12946 0.64 215 10.6 18.8 1009017


Ditch witch HDD drill Rod


Product code Rod body OD
(inch)
wall thickness
(inch)
working length
(ft)
Thread type Tool joint OD
(inch)
Tool joint inside diameter of the pin end
(inch)
Pin connection length
(inch)
Grade HDD Drill Rod torsional strength
(ft-lb)
HDD Drill Rod tensile strength
(lb)
Tool Joint and body torsional strength ratio Minimum bend radius
(ft)
Angle Bend slope ratio
(%)
Part Number
JT920/JT921(One piece upsetted) 1.661 0.236 6.6 DW1.41 1.744 0.354 2.240 Z140 2242 3048 0.5 102 7.4 12.9 1001003
JT1720(One piece upsetted) 2.126 0.256 9.8 DW1.69 2.362 0.650 2.913 Z140 5178 4332 0.61 131 8.6 15.2 1003001
JT2020/JT20(One piece upsetted) 2.126 0.295 10.0 DW1.94 2.638 0.748 2.953 Z140 6148 4894 0.67 131 8.6 15.2 1003003
JT25,JT30(One piece upsetted) 2.374 0.295 9.8 DW2.11 2.750 0.827 3.335 Z140 8062 5557 0.67 146 7.7 13.6 1004017
JT2720(One piece upsetted) 2.374 0.295 9.8 DW1.94 2.598 0.669 2.953 Z140 6299 5557 0.52 146 7.7 13.6 1004034
JT25/JT2720M1/3020M1(One piece upsetted) 2.374 0.335 9.8 DW2.11 2.811 0.748 3.335 Z140 10241 6178 0.67 146 7.7 13.6 1004021
JT4020(One piece upsetted) 2.874 0.394 14.8 DW2.4 3.126 0.984 3.917 Z140 10495 8841 0.47 177 9.6 16.9 1006003
JT4020M1(One piece upsetted) 2.874 0.413 14.8 DW2.59 3.346 1.181 3.598 Z140 13980 9203 0.6 177 9.6 16.9 1006019
JT7020/8020(Rotary friction welding) 3.5 0.368 14.8 DW3.27 4.000 1.378 5.217 S135 20003 10061 0.6 215 7.9 13.8 1009010

Case HDD drill Rod

Product code Rod body OD
(inch)
wall thickness
(inch)
working length
(ft)
Thread type Tool joint OD
(inch)
Tool joint inside diameter of the pin end
(inch)
Pin connection length
(inch)
Grade HDD Drill Rod torsional strength
(ft-lb)
HDD Drill Rod tensile strength
(lb)
Tool Joint and body torsional strength ratio Minimum bend radius
(inch)
Angle Bend slope ratio
(%)
Part Number
CASE 6010( One piece upsetted ) 2.059 0.255 10.0 CASE 6010 2.244 0.708 2.500 Z140 7298 5298 0.63 98 7.9 13.8 1002003
CASE 6030( One piece upsetted ) 2.374 0.280 9.8 CASE 6030 2.677 0.787 2.500 Z140 5982 5298 0.58 146 7.7 13.6 1004005


HDD Drill Rods for Chinese HDD Drill rigs


Product Rod body OD
(mm)
Wall thickness
(mm)
working length
(mm)
Thread type Tool joint OD
(mm)
Tool joint inside diameter of the pin end
(mm)
Pin connection length
(mm)
Grade HDD Drill Rod torsional strength
(N.M)
HDD Drill Rod tensile strength
(T)
Tool Joint and body torsional strength ratio Minimum bend radius
(m)
Angle
(°)
Bend slope ratio
(%)
Part Number
60×3000-DH(One piece upsetted) 60.3 7.1 3000 60DH 68 20 70 S135 8780 112.6 0.58 44.4 7.7 13.6 1004001
60×3000-DDW(One piece upsetted) 60.3 7.1 3000 TXS-60 68 20 72 S135 9185 112.6 0.6 44.4 7.7 13.6 1004033
60×3000-DH-Ⅱ(One piece upsetted) 60.3 7.1 3000 DH60-2 71 22 70 S135 10745 112.6 0.71 44.4 7.7 13.6 1004008
68-4500(One piece upsetted) 68 8 4500 2 5/8"-TPV 76.2 32 70.18 S135 11120 143.1 0.51 50.2 10.3 18.1 1005007
68-3000(One piece upsetted) 68 8 3000 2 5/8"-TPV 76.2 32 70.18 S135 11120 143.1 0.51 50.2 6.9 12 1005008
73×3000-ZT(One piece upsetted) 73 8 3000 ZT23 81 28 76.2 S135 15560 155.1 0.6 53.8 6.4 11.2 1006002
73×3000-DDW(One piece upsetted) 73 8 3000 NC23 79 26 79 S135 14570 155.1 0.57 53.8 6.4 11.2 1006004
73×3000-DH26(One piece upsetted) 73 8 3000 DH26 87 30 83 S135 19200 155.1 0.75 53.8 6.4 11.2 1006017
73×3000-DH23(One piece upsetted) 73 8 3000 DH23 81 28 85 S135 15730 155.1 0.59 53.8 6.4 11.2 1006001
83×3000-WM80(One piece upsetted) 83 9 3000 WM80 92 38 88.9 S135 22095 198.6 0.59 61.2 5.6 9.8 1008001
83×4500-WM80(One piece upsetted) 83 9 4500 WM80 92 38 88.9 S135 22095 198.6 0.59 61.2 8.4 14.8 1008002
89×3000(One piece upsetted) 88.9 8.38 3000 DH31 103.5 50.8 88.9 S135 27715 193 0.68 65.6 5.2 9.2 1009018
89×4500(One piece upsetted) 88.9 9.35 3000 DH31 105 42 88.9 S135 33815 221.8 0.74 65.6 5.2 9.2 1009004
89×6000-DH31(One piece upsetted) 88.9 9.35 6000 DH31 105 42 88.9 S135 33815 221.8 0.74 65.6 10.5 18.5 1009013


HDD Drill Rods for Chinese and overseas HDD Drill rigs


Product code Rod body OD
(mm)
Wall thickness
(mm)
working length
(mm)
Thread type Tool joint OD
(mm)
Tool joint inside diameter of the pin end
(mm)
Pin connection length
(mm)
Grade HDD Drill Rod torsional strength
(N.M)
HDD Drill Rod tensile strength
(T)
Tool Joint and body torsional strength ratio Minimum bend radius
(m)
Angle
(°)
Bend slope ratio
(%)
Part Number
89x4500-DH31(Rotary friction welding) 88.9 9.35 4500 NC31 104.8 36 98 S135 31905 221.8 0.7 65.6 7.9 13.8 1009022
101.6-6000-NC38(Rotary friction welding) 101.6 8.8 6000 NC38 127 46 110 S135 54325 243.5 0.92 75 9.2 16.1 1010001
101.6x6000-NC40(Rotary friction welding) 101.6 8.38 6000 NC40 139.7 50.8 114.3 S135 49165 232.9 0.86 75 9.2 16.1 1010003
114.3x6000-NC38(Rotary friction welding) 114.3 8.56 6000 NC38 127 46 110 S135 54130 269.9 0.72 84.4 8.2 14.3 1011004
114.3-6000-NC40(Rotary friction welding) 114.3 8.56 6000 NC40 139.7 50 126.3 S135 69695 269.9 0.93 84.4 8.2 14.3 1011003
114.3x6000-NC46(Rotary friction welding) 114.3 8.56 6000 NC46 158.8 62 126.3 S135 95360 269.9 1.27 84.4 8.2 14.3 1011001
127x6000-NC50(Rotary friction welding) 127 9.19 6000 NC50 168.28 69.8 126.3 S135 122815 322.8 1.23 93.6 7.3 12.9 1012001
127x9600-NC50(Rotary friction welding) 127 9.19 9600 NC50 168.28 69.8 126.3 S135 122815 322.8 1.23 93.6 11.7 20.8 1012002
139.7x9600-9.19(Rotary friction welding) 139.7 9.19 9600 5 1/2FH 190.5 101.6 139 S135 95060 357.6 0.76 103 10.7 18.8 1013002
139.7x9600(Rotary friction welding) 139.7 10.54 9600 5 1/2FH 190.5 76.2 139 S135 168170 405.9 1.22 103 10.7 18.8 1013001
168.3x9600(Rotary friction welding) 168.3 10.54 9600 6 5/8FH 215.9 108 127 S135 146780 495.8 0.7 124.2 8.9 15.6 1014001
168.3x9600-9.19(Rotary friction welding) 168.3 9.19 9600 6 5/8FH 215.9 108 127 S135 146780 436 0.79 124.2 8.9 15.6 1014002
193.7x9600(Rotary friction welding) 193.7 9.19 9600 6 5/8FH 215 108 127 S135 146790 505.6 0.59 142.8 7.7 13.5 1025001
193.7x9600-7 5/8FH (Rotary friction welding) 193.7 9.19 9600 7 5/8FH 215 150 127 S135 177850 505.6 0.7 142.8 7.7 13.5 1025002
193.7x9600-6 5/8IF (Rotary friction welding) 193.7 9.19 9600 6 5/8IF 230 132 127 S135 169865 505.6 0.68 142.8 7.7 13.5 1025003
Please Feel free to give your inquiry in the form below.We will reply you in 24 hours.
* Subject :
*Email :
  • Name :

  • Phone:

  • *Other messages :
    *CheckCode

    CopyRlght © Wuxi Double Horse Drlling Tools co .LTD.ALL Right Recesved